Mantis™ Phased-Array Flaw Detector
General
L x W x H: 320mm x 220mm x 100mm
Operating temperature range: from -10°C to 45°C | 14°F to 113°F Storage temperature range: -10°C to 60°C | 14°F to 140°F with battery Operating time: 4h (hot swappable battery)
8.4‘’ high contrast resistive screen – resolution 1024×768 px Weight: 4,4kg with battery
IP65 according to CEI60529
Shock resistance according to MIL-STD-810G
Standard phased-array
Linear scanning, sectorial scanning, compound
Maximum active aperture: 16 channels
Phased array computation delay laws on plate, cylinder, T* & Y*, nozzle* Focusing mode: true depth, sound path, projection
Linear, matrix*, DLA and DMA* probes
Up to 6 probes | Up to 8 groups | Up to 2048 delay-laws CIVA fueled phased-array calculator
Real-time TFM
Reconstruction channels: 16 up to 64* Max number of points of reconstructed image: up to 65k Max refresh rate: up to 80fps Sound paths: direct (L or S), indirect* and converted* modes
Pulsers
64 phased-array channels:
Negative square pulse, width: 35ns to 1250ns Voltage: 12V – 90V with 1V step
Max. PRF: 12kHz up to 20kHz*
UT-TOFD:
Negative square pulse, width: 30ns to 1250ns Voltage: 12V to 200V with 1V step
Max. PRF: 12kHz up to 20kHz*
Receivers
16 phased-array channels:
Input impedance: 50Ω
Frequency range: 0.4 to 20MHz
Max. input signal: 2Vpp | TCG – ACG – DGS calibration wizard Gain: up to 120dB (0.1dB step)
Cross-talk between two channels < 50 dB
UT-TOFD:
Input impedance: 50Ω Frequency range: 0.6 to 25MHz Max. input signal: 2Vpp
TCG – DAC calibration wizard Gain: up to 120dB (0.1dB step)
Digitizer
Digitizing and real-time summation on 16 channels FIR filters
Real-time averaging up to x32
Rectified, RF, envelope
Resolution: 16bits
Max. sampling frequency: 100 MHz Digitizing depth up to 16k points A-scan range or delay max 65k points
Acquisition
Hardware acquisition gates
A-Scan/Peak data recording
FMC recording
Acquisition trigger on time, event, encoder
Max. data flow 150 MB/s on a 128Gb SSD Inspection data file size: up to 10Gb
Data transfer through Ethernet
800% amplitude range
Wizards
CAD overlay and 3D view
Real-time phased array calculator Base-time calibration for conventional UT Wedge calibration (angle, height) Velocity calibration
Scanner calibration
Amplitude calibration (TCG, DAC, DGS)
Probe design | Weld geometry design
Amplitude balancing
Part geometry with parametric shapes: plate, cylinder, T* & Y*, nozzle*
Analysis
Capture © software with analysis and reporting tools – Free viewer
A-Scan, B-Scan, C-Scan, D-Scan, Echodynamic, Top view, Side view, 3D view Analysis gates
Compatibility with CIVA analysis and ENLIGHT
Amplitude range: 800%
Overlay part geometry: plate, cylinder, T* or Y* section, nozzle* Overlay weld geometry
Customizable inspection report
I-O
Encoder inputs: 2 axes up to 3 axes*
1 IPEX connector for phased-array probe – can be upgraded to 2 with splitter* 1 USB 2.0 + 1 USB 3.0 + 1 mini display port + 1 RJ45 Ethernet
2 LEMO 00 connectors for UT-TOFD (1 PR – 1R) 1 external trigger
7 TTL inputs/outputs
